If you are an artist who is working on a metal sculpture that requires welding cold rolled steel pieces, then follow these tips to achieve the best possible weld results.
Weld Cold Rolled Steel Using an Electric Arc Welder
Since cold rolled steel has been processed to have strength, heating it with a gas welder will ruin the properties of the steel you are welding. As a gas welder heats the area around the weld, the steel will essentially become hot rolled and this defeats the purpose of using the harder, cold rolled material.
Read More
Aluminum seals are often seen as being more corrosion-resistant than steel. But aluminum is not impervious to corrosion even if the aluminum can form a protective coating on its own. You may need to provide your own protective coating to the aluminum seal depending on the conditions under which your product will be kept.
Cleaning Aluminum
Aluminum becomes dull as a result of corrosion, which causes calcium, lime, tarnish, oil and hard water stains to accumulate on the aluminum.
Read More
Centrifugal blowers, especially those found in factories that move a lot of gases and air around, may have played a part in the creation of theatrical fog machines. The blowers have several blades that spin and move air or gas rapidly from a an exhaust pipe up through the roof of the building or into another part of the factory where the gas is used for the production of a product or used as fuel.
Read More
If you are looking for an entertaining outdoor toy that gets your child moving, a scooter board will give them countless hours of fun. It is not that difficult to make a scooter board on your own using basic tools and a few supplies from a hardware store. Here are some instructions for you to follow when making a scooter board for your child.
Materials You Will Need
3/4"-1" thick piece of wood cut into a square with about a foot of length on each side 1"
Read More