Too many people will make the assumption that their air tools do not need a lot of care or maintenance. The thing is, though, when the industrial air tools are not properly taken care of, they can begin to lose their power. They can essentially become useless. This is why you will want to make sure that you are doing everything in your power to take good care of your air tools. If you don't do that, you will end up having to replace them a lot sooner than you would have expected. To help you keep your industrial air tools in optimal condition for as long as possible, you will want to use the following advice.

Things To Check

There are some things that should be checked every day and other things that need to be checked about once a week. The things you will need to check each day include all of the lubricants. If there is not enough lubricant, the air tool will not be able to function properly. As for the things that you should inspect weekly, those include the separator element, the belts, and the intake vents. Other things that need to be checked occasionally include air and old filters, motor bearings, couplers, and seals. Clean and replace things as needed in order to keep the air tools running smoothly.

Keep Moisture Out Of The Lines

You want to make sure that you are removing any moisture from inside the lines before you attach any of your tools to the air tool. The last thing you want is for a lot of moisture to end up damaging your expensive tools. To remove any existing moisture, you will want to use refrigerated air dryers or compressor oil separators.

Store The Air Tools Properly

The air tools must be stored properly when they are not in use. This means placing them in cool, dry areas so they remain protected. You do not want them exposed to a lot of moisture and you do not want them anywhere where they might be dropped or knocked off of a shelf.

With all of that in mind, you should find that it is going to be a lot easier to maintain your air tools. They will last a long time before you will even have to start thinking about replacing them. Just make sure that everyone else in your shop knows what they need to do in order to care for the air tools. This way, it is not just you that has to perform the maintenance. Everyone that uses the air tools should know how to properly maintain them.